dusting - medium flat x 2, medium round, small round x 2
painting palette
teardrop cutter - 10 mm x 8 mm (or similar size; or use a wheel tool)
foam pad
paper towel (a few pieces)
florist wires #24 (or similar thickness) - 4 cm long pieces x 3
pliers (to trim sticks and florist wires)
* I cover the cake dummies on which I build the cake toppers with cling film. That way the small bits of polystyrene don't get into the paste and the dummy doesn't move around the board.
** If you don't have piping nozzles roll tiny balls of paste and flatten them.
You don't have to use the same types of pastes as me. Please feel free to use products which you are used to and like the most.
* Flower paste = gum paste. It holds the shape well and dries out fast. I used Squires Kitchen flower paste.
Alternatively you can use:
modelling paste (you can add some CMC to speed up the drying time)
sugarpaste + CMC (add quite a lot of CMC; if the parts are too soft the cake topper will sink)
** 50/50 FP/MP mix = a mix of flower paste and modelling paste (1:1 ratio). Mix similar size pieces. The FP/MP mix doesn't dry out as fast as plain flower paste so you have more time for modifications. I used Squires Kitchen flower paste and Saracino modelling paste.
Alternatively you can use:
plain flower paste (you will need to model the head quite quickly, otherwise you will get cracks)
plain modelling paste
sugarpaste + CMC (add quite a lot of CMC; if the parts are too soft the cake topper will sink; don't add too much CMC because you will get cracks)
Print these templates in 1:1 scale ('Actual size'). You'll find more information on how to use the templates here.
If you need a different size cake topper, print the templates smaller or larger.
Height:
with the branches - 10.5 cm
without the branches - 8 cm
Width:
body - 2.5 cm
head - 6 cm
If you want a different size cake topper, print the templates smaller or larger.
You don't have to use the same types of pastes as me. Please feel free to use products which you are used to and like the most.
Flower paste*:
brown - 12 g
green - 1 g
black - 2 g
white - 1 g
FP/MP mix**:
brown - 55 g
* Flower paste = gum paste. It holds the shape well and dries out fast. I used Squires Kitchen flower paste.
Alternatively you can use:
modelling paste (you can add some CMC to speed up the drying time)
sugarpaste + CMC (add quite a lot of CMC; if the parts are too soft the cake topper will sink)
** 50/50 FP/MP mix = a mix of flower paste and modelling paste (1:1 ratio). Mix similar size pieces. The FP/MP mix doesn't dry out as fast as plain flower paste so you have more time for modifications. I used Squires Kitchen flower paste and Saracino modelling paste.
Alternatively you can use:
plain flower paste (you will need to model the head quite quickly, otherwise you will get cracks)
plain modelling paste
sugarpaste + CMC (add quite a lot of CMC; if the parts are too soft the cake topper will sink; don't add too much CMC because you will get cracks)
8.
Use a wooden skewer to make a tunnel in the cake dummy. Insert the stick straight and all the way down. Push it in and take it out a couple of times. That way you will widen the tunnel - it will be easier to take the cake topper out later.
We use cookies and other technologies to improve your experience and to analyse the use of our website. By clicking the ‘I Accept’ button or continuing to use our website, you are consenting to our
Privacy Policy
I ACCEPT
This page is intended to be viewed online and may not be printed.